|Other Uses for GO-15-HF™in Your Vehicle|
|System Treated||Fluid Type||Ounces of GO-15-HF™to add|
|Power Steering||Ounces of GO-15-HF™per quart of Power Steering Fluid||2|
|Manual Transmission||Ounces of GO-15-HF™per quart of Manual Transmission Fluid||4|
|Differential||Ounces of GO-15-HF™per quart of Differential Fluid||4|
|Hydraulic Systems||Per 5 Gallons of fluid at each 1000 hour interval||8|
|Compressors||Varies per application||1|
|Ball & Roller Assemblies||Per pound of grease mixed prior to packing||8|
GO-15-HF is 300% more effective than the others!
|Slick50||Bearing FAILURE at 1300 lbs of pressure.|
|Duralube||Bearing FAILURE at 1600 lbs of pressure.|
|Still Going Strong at 4,500 lbs of pressure!|
GO-15-HF™ is over 300% more effective than Duralube and Slick50
|GO-15-HF™ Never Failed!|
Failed at 1600 ft-lbs, approximately 25 seconds into a one minute run.
Failed at 1300 ft-lbs. approximately 12 seconds into a one minute run.
Today’s oils are far more advanced than those used just 5 years ago, let alone decades ago, so why treat today’s oil when the problem is metal wear? TREAT THE METAL, NOT THE OIL!
With GO-15-HF™ and its "Metal Lubricity Technology® or MLT," space age technology in metal lubricity is ready for today’s engine needs, and with GO-15-HF™ use, your vehicle will see a:
- - Boost in Power
- - Boost in Efficiency
- - Boost in Mileage
- - Reduction in Emissions
GO-15-HF™ is safe to use on any metal-to-metal friction generating application. The savings you get from using GO-15-HF™, can give you a return on investment that can be felt every time you put gas into your vehicle.
GO-15-HF™ treats the wearing metal surfaces and, as such, requires only a small amount of product.GO-15-HF™ is compatible with all types and forms of lubricating oils, gear oils, motor oils, compressor oils, lubricating grease, hydraulic fluids, etc.
GO-15-HF™ and its "Metal Lubricity Technology®" uses heat and friction to produce a thermal reaction with the metal surface being treated. GO-15-HF™ is an energy technology that through the interaction of its trade secret ingredient MBS4 combines with heat and friction to produce a thermal reaction resulting in molecules of MBS4 to combine with molecules of the metal surface.
This reaction creates a chemical condition known as Boundary Lubrication. A change in the chemical composition of the metal surface creates a new metal boundary surface that is free of most defects and friction points.
This improves most all of the related fundamental operating efficiencies of internal combustion engines.
Where can I use GO-15-HF™ ?
Car Brands You can Use With GO-15-HF™ ?
If it requires oil for lubrication – it requires GO-15-HF™